AHT10 RH/TEMP Sensor

AHT10

The AHT10 is a high precision, fully calibrated, temperature and humidity sensor chip package.

Use the AHT10 module (About Modules) for it.

You can wire this up as follows:

Device Pin Espruino
1 (GND) GND
2 (VCC) 3.3
3 (SCL) Any I2C software compatible pin
4 (SDA) Any I2C software compatible pin

How to use the module:

const sensor = require("AHT10").connect(SCL,SDA, bitrate); // Bitrate is optional, defaults to 300000
sensor.getTemperature();
sensor.getHumidity();
sensor.getDewPoint();

This page is auto-generated from GitHub. If you see any mistakes or have suggestions, please let us know.