The Quectel M35 is a GSM/GPRS module that can provide internet access via an AT command set.
Support is provided in Espruino by the QuectelM35 (About Modules) module.
This module expects the modem to have started and to be connected to the network already. This means you may need to wait ~15 seconds after powering on for it to work.
Serial1.setup(115200, { rx: .., tx : ... });
function connectionReady() {
var http = require("http");
http.get("http://www.pur3.co.uk/hello.txt", function(res) {
res.on('data', function(data) {
console.log(data);
});
});
}
gprs = require('QuectelM35').connect(Serial1, {}, function(err) {
if (err) throw err;
connectionReady();
});
gprs.at
The AT command handler - use this to send your own AT commands to the M35.
gprs.debug(isDebugging)
Return debugging information and to turn on/off debug messages.
gprs.getVersion(function(err, version) { ... });
Call the callback with the version number reported back from the AT+GMR
command. The callback is called with err==null
on success.
gprs.getIP(function(err, ip) { ... });
Call the callback with the current IP address, as a String. The callback is called with err==null on success.
This page is auto-generated from GitHub. If you see any mistakes or have suggestions, please let us know.