import pinutils;

info = {
 'name' : "NINA B112",
 'link' :  [ "https://www.ublox.com" ],
  # This is the nRF52832 (NINA BL112) 
 'default_console' : "NINA_EVB",
 'default_console_tx' : "D6",
 'default_console_rx' : "D5",
 'default_console_baudrate' : "9600",
 'variables' : 2250, # How many variables are allocated for Espruino to use. RAM will be overflowed if this number is too high and code won't compile.
 'bootloader' : 1,
 'binary_name' : 'espruino_%v_nrf52832_mdk.hex',
 'build' : {
   'optimizeflags' : '-Os',
   'libraries' : [
     'BLUETOOTH',
     'NET',
     'GRAPHICS',
     'CRYPTO',
     'NFC',
     'NEOPIXEL'
   ],
   'makefile' : [
     'DEFINES+=-DHAL_NFC_ENGINEERING_BC_FTPAN_WORKAROUND=1', # Looks like proper production nRF52s had this issue
     'DEFINES+=-DCONFIG_GPIO_AS_PINRESET', # Allow the reset pin to work
     'DEFINES+=-DBLUETOOTH_NAME_PREFIX=\'"nRF52832-MDK"\'',
     'DFU_PRIVATE_KEY=targets/nrf5x_dfu/dfu_private_key.pem',
     'DFU_SETTINGS=--application-version 0xff --hw-version 52 --sd-req 0x8C'
   ]
 }
};

chip = {
  'part' : "NRF52832",
  'family' : "NRF52",
  'package' : "QFN48",
  'ram' : 64,
  'flash' : 512,
  'speed' : 64,
  'usart' : 1,
  'spi' : 3,
  'i2c' : 2,
  'adc' : 1,
  'dac' : 0,
  'saved_code' : {
    'address' : ((118 - 10) * 4096), # Bootloader takes pages 120-127, FS takes 118-119
    'page_size' : 4096,
    'pages' : 10,
    'flash_available' : 512 - ((31 + 8 + 2 + 10)*4) # Softdevice uses 31 pages of flash, bootloader 8, FS 2, code 10. Each page is 4 kb.
  },
};

devices = {
  'BTN1' : { 'pin' : 'D16', 'pinstate' : 'IN_PULLDOWN' }, # Pin negated in software ?
  'LED1' : { 'pin' : 'D9', 'inverted'  : False }, # Pin negated in software ?
  'LED2' : { 'pin' : 'D16', 'inverted' : False }, # Pin negated in software ?
  'LED3' : { 'pin' : 'D18', 'inverted' : False }, # Pin negated in software ?
  'RX_PIN_NUMBER' : { 'pin' : 'D5'},
  'TX_PIN_NUMBER' : { 'pin' : 'D6'},
  'CTS_PIN_NUMBER' : { 'pin' : 'D7'},
  'RTS_PIN_NUMBER' : { 'pin' : 'D31'},
  # Pin D22 is used for clock when driving neopixels - as not specifying a pin seems to break things
};

# left-right, or top-bottom order
board = {
  'left' : [ 'VIN', '5V', 'GND', 'PD4','PD5','PD6','PD7','PD8','PD9','PD10','PD11','PD12','PD13','PD14','PD15','PD16','PD17','PD18'],
  'right' : [ '3V3', 'GND', 'RST', 'CLK', 'DIO','TDO','TDI', 'TXD','RXD','PD3','PD2','PD31','PD30','PD29','PD28','PD27','PD26','PD25'],
};
board["_css"] = """
""";

def get_pins():
  pins = pinutils.generate_pins(0,31) # 32 General Purpose I/O Pins.
  pinutils.findpin(pins, "PD0", True)["functions"]["XL1"]=0;       #OK NC
  pinutils.findpin(pins, "PD1", True)["functions"]["XL2"]=0;       #OK NC
  pinutils.findpin(pins, "PD2", True)["functions"]["I2C_SDA"]=0;   #OK AN1 i2c_sda
  pinutils.findpin(pins, "PD3", True)["functions"]["I2C_SCL"]=0;   #OK AN0 i2c_scl
  pinutils.findpin(pins, "PD4", True)["functions"]["ADC1_IN2"]=0;  #OK AN2
  pinutils.findpin(pins, "PD5", True)["functions"]["RXD"]=0;       #OK TXD D0
  pinutils.findpin(pins, "PD6", True)["functions"]["TXD"]=0;       #OK TXD D1
  pinutils.findpin(pins, "PD7", True)["functions"]["CTS"]=0;       #OK CTS D2
  pinutils.findpin(pins, "PD8", True)["functions"]["LED_1"]=0;     #OK LED1 D9
  pinutils.findpin(pins, "PD9", True)["functions"]["NFC1"]=0;      #OK NFC1 D6
  pinutils.findpin(pins, "PD10", True)["functions"]["NFC2"]=0;     #OK NFC1 D7
  pinutils.findpin(pins, "PD11", True)["functions"]["SPI_CS"]=0;   #OK SPI_CS D10
  pinutils.findpin(pins, "PD12", True)["functions"]["SPI_MISO"]=0; #OK SPI_MISO D12
  pinutils.findpin(pins, "PD13", True)["functions"]["SPI_MOSI"]=0; #OK SPI_MOSI D11
  pinutils.findpin(pins, "PD14", True)["functions"]["SPI_SCK"]=0;  #OK SPI_SCK  D13
  pinutils.findpin(pins, "PD16", True)["functions"]["LED_2"]=0;    #OK LED2/SWITCH
  pinutils.findpin(pins, "PD18", True)["functions"]["LED_3"]=0;    #OK LED3 D4
  pinutils.findpin(pins, "PD28", True)["functions"]["ADC1_IN5"]=0; #OK AN5
  pinutils.findpin(pins, "PD29", True)["functions"]["ADC1_IN4"]=0; #OK AN4
  pinutils.findpin(pins, "PD30", True)["functions"]["ADC1_IN3"]=0; #OK AN3
  pinutils.findpin(pins, "PD31", True)["functions"]["RTS"]=0; 	   #OK RTS D3
  # everything is non-5v tolerant
  for pin in pins:
    pin["functions"]["3.3"]=0;
  #The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.
  return pins